The most fire resistant tableware can also be recy

Non degradable tableware can also be recycled in an environmentally friendly manner. The State Environmental Protection Administration recently approved the "technical requirements for the certification of environmental labels of disposable tableware". The "requirements" stipulates for the first time that disposable tableware that is not easy to degrade but easy to recycle can also be used as environmental labeling products. This is a major breakthrough and important supplement to the previous preventive measures: 1. The national policy on disposable tableware. At the same time, this requirement also removes degradable foaming tableware from environmental labeling products. The new environmental label certification technology requires that "easy recycling" is defined as: the product is not easy to degrade, but has mature recycling processing and utilization technology, and the establishment of recycling system should reach a certain scale. In other words, the recycling rate of disposable tableware produced with materials that are easy to recycle is not low. Organizer: 2. Free arc height - the arc height of leaf spring at no load h 0. Hunan Academy of Forestry Sciences can apply for environmental labeling products at 75%. This requirement numbered "hbc1-2001" refers to the published national standards for food packaging, tableware (the company can provide a series of Paek composite products), disposable degradable tableware and so on. Another difference between the new requirements and the original technical requirements is that degradable foamed tableware is no longer allowed to apply for environmental labels, so as to be consistent with the relevant provisions of the State Economic and Trade Commission prohibiting the use of disposable foamed plastic lunch boxes. The disposable tableware mentioned in the new requirements does not contain disposable foamed plastic tableware, and its marked products are divided into three categories: biodegradable, such as paper products (including pulp molding and paperboard coating), edible powder molding, plant fiber molding, etc; Photodegradable materials, such as photodegradable plastics (non foaming); Materials that are easy to be recycled, such as polypropylene (PP), high impact polystyrene (HIPS), biaxial tensile polystyrene sheet products, composite products filled with polypropylene with high filling amount of natural inorganic minerals, etc